|
|
 |
 |
Case with introduction of
Planetary mixer/deaerator |
| A:Precise electronic parts usage |
|
| Electronic
parts maker(a) |
 model:
KK-500
material
and purpose: Ceramic paste
|
Reason for adoption made
of our company, Result after introduction
Uses the system for the stir and the debubble usage of goods of the ceramic construction
it of small part usage.
Even in case of alumina paste consisting of large portion of powder, it was able
to process efficiently by the step procedure (in low speed at "a" step
and in midium-high speed / rotation ratio to revolution =0.5-1.0 at "b"
step), without generating the cluster of powder. |
|
|
|
|
|
| Electronic
parts maker(b) |
model:
KK-5000
material
and purpose: Slurry
|
Problem before introduction
Has the small size machine made of the other companies but its dispersion ability
is bad (perhaps, because the rotation speed to the revolution was low), so mixing
together with the balls. |
|
Reason
for adoption made of our company, Result after introduction
When most having tested with KK-100 of this specification in the amount of processing,
the decentralization of better slurry for good terms to be found for rotation
ratio =0.5-0.7, and to put and to use the ball mill made of the other companies
was obtained.
The large-scale model with this function was introduced for mass production. |
|
|
|
|
|
| Portable
telephone parts maker |
model:
KK-500/KK-100
material
and purpose: Sealant and special ink
|
Problem before introduction
The small size machine made of the other company had been used by the sealant
usage of the key-top but the operators were embarrassed because the failure such
as cutting belt was generated every almost three months. |
|
Reason
for adoption made of our company, Result after introduction
Because sealant can be refined at a time collectively, KK-500 was able to be introduced,
and achieve the work efficiency improvement. And The operation of the device was
very steady, and KK-100 did an additional introduction by another usage purpose
about two years later because there were few failures, too. |
|
|
|
|
|
